Bruce Dura-Luster® No-Wax Floor Cleaner

For regular cleaning of no-wax hardwood and laminate floors.

• A unique cleaner that lifts soil from the surface of the urethane finish without leaving a film.
• Ready-to-Use formula
• Great for spot cleaning and all over floor cleaning.
• No rinsing and no dulling film
• The right product for your hardwood floor!

Armstrong Hardwood & Laminate Cleaning System

Contains all the tools for easy cleaning of all no-wax hardwood and laminate floors.

• A quick and easy way to clean!
• Contains 1 32oz. spray cleaner, 1 large swivel-head mop, and 1 absorbent terry-cloth mop cover.
• Swivel-head mop reaches under furniture and appliances.
• Mop cover is reversible, washable and reusable.
• Finally, a hassle-free, convenient way to clean!

Armstrong Cleaning System Replacement Covers

2 terry cloth mop replacement covers for Armstrong swivel head mops.

• Very absorbent
• Reversible as you clean
• Reusable and washable

Armstrong Hardwood & Laminate Cleaner Refill

Economical size used to refill Armstrong Hardwood & Laminate Spray Cleaner.

• For regular cleaning of all no-wax hardwood and laminate floors.
• Do not pour directly on floor.

Armstrong Restore Hardwood Floor Finish

A semi-gloss urethane dressing that adds shine and protects from nicks and scratches.

• Easy to apply!
• Shine that lasts!
• Renews and restores the finish on older floors or high traffic areas.
• Great alternative to resanding and recoating.
• Only for use on semi-gloss to high-gloss no-wax, urethane finish floors.

Bruce Dura-Luster® No-Wax Floor Cleaner

For regular cleaning of no-wax hardwood and laminate floors.

• A unique cleaner that lifts soil from the surface of the urethane finish without leaving a film.
• Ready-to-Use formula
• Great for spot cleaning and all over floor cleaning.
• No rinsing and no dulling film
• The right product for your hardwood floor!

Bruce Dura-Luster® Floor Care Kit

Contains all the tools for easy cleaning of no-wax hardwood floors.

• A quick and easy way to clean!
• Contains 1 32oz. spray cleaner, 1 large swivel-head mop, and 1 absorbent terry-cloth mop cover
• Swivel-head mop reaches under furniture and appliances
• Mop cover is reversible, washable and reusable
• Perfect care of hardwood floors from Bruce!

Bruce Dura-Luster® Replacement Mop Covers

2 terry cloth mop replacement covers for all Armstrong swivel head mops.

• Soft, absorbent, terry cloth covers, elastic-fitted for quick and easy replacement on the Bruce hardwood floor swivel-head mop.
• Reversible
• Reusable and washable

Once 'n Done® Floor Cleaner

For regular cleaning of no-wax vinyl, ceramic, marble, granite, terrazzo, slate and stone floors.

• No rinsing required
• Leaves no dulling film or residue that can build up.
• Spray bottle used for spot cleaning and all over floor cleaning.
• Ready-to-use formula, no diluting.
• Unique cleaner that keeps floors looking their best!

Once 'n Done® Cleaning System

Contains all the tools for easy cleaning of no-wax floors.

• Contains a 32 oz. spray cleaner, 1 large swivel-head mop, and 1 absorbent terry-cloth mop cover.
• The Once 'n Done cleaner can be used on no-wax vinyl, ceramic, marble, granite, terrazzo, slate and stone floors.
• Swivel-head mop reaches under furniture and appliances.
• Mop cover is reversible, washable and reusable.
• Finally, an easy and convenient way to clean!

Once 'n Done® Floor Cleaner

For regular cleaning of no-wax vinyl, ceramic, marble, granite, terrazzo, slate and stone floors.

• No rinsing
• Leaves no dulling film
• Economical, concentrate formula
• Unique formula that keeps floors looking their best!

Shinekeeper® Floor Polish

Protective finish for use on all no-wax and linoleum floors.

• For high-traffic areas or older, worn floors
• Restores gloss and protects
• Keeps on shining after repeated washings
• Ready-to-use formula

Satinkeeper™ Low Gloss Floor Finish

Restores gloss and protects the finish of low gloss and ultra low gloss no-wax vinyl and linoleum floors

• Easy to use!
• Renews the appearance of worn or dulled floors
• Protects floor from scuffs, scratches and dirt
• Does not require buffing
• Ready-to-use-formula

Floor Protectors

Protects all residential floors from scratches and abrasions.

• Contain 4 floor protectors and 4 felt pads 1 1/16" diameter, available in 3 finishes.
• Easy to install and remove
• Screws into place
• Distributes the weight of furniture evenly to reduce indentations
• Prevents abrasions with unique replaceable felt pads

Floor Protector Replacement Felt Pads

16 self-adhesive pads, 1 1/16" diameter, for use with Armstrong Floor Protectors.

• Apply to the legs of furniture and appliances
• Prevent scratches, abrasions and indentations

Genuine Linoleum Polish

Specially formulated for use on Armstrong genuine linoleum floors to keep floors looking their best.

• Part of the linoleum recommended care system.
• Adds shine and protects the floor
• Polish is required after floor stripping

Genuine Linoleum Stripper

Specially formulated for use on Armstrong genuine linoleum floors to keep floors looking their best.

• Removes polish and wax buildup as well as tough dirt and grime
• Must be followed by Armstrong Genuine Linoleum Floor Polish
• Part of the linoleum recommended care system

Satinkeeper™ Low Gloss Floor Finish

Restores gloss and protects the finish of low gloss and ultra low gloss no-wax vinyl and linoleum floors

• Easy to use!
• Renews the appearance of worn or dulled floors
• Protects floor from scuffs, scratches and dirt
• Does not require buffing
• Ready-to-use-formula

• Initial Care:
  Following installation, clean with Hartco® Easy Clean floor cleaner. If the floor was glued down, remove any residual adhesive with the appropriate adhesive remover.
  
  

  Ongoing Routine Care and Maintenance:

  • Vacuum, sweep or dust mop your floor once a week, or more if needed. The vacuum head must be brush or felt, and a wand attachment is preferable. Do not use vacuums with beater bars or hard heads. A Hartco® hardwood floor swivel-head mop with terry cloth cover is also highly recommended to eliminate finer particles of grit and dirt that can act like sandpaper on hardwood floors.

  Spills and tracked-in dirt should be wiped up immediately. For spot cleaning, apply Hartco® Easy Clean floor cleaner onto a clean cloth and rub onto the spot.

• Never apply wax treatments to your urethane-coated floor.

• Periodically, as necessary, thoroughly clean the floor with Hartco® Easy Clean floor cleaner using a Hartco® hardwood floor swivel-head mop with terry clothcover. Spray the floor cleaner directly onto the floor or dampen the swivel-head mop and apply. DO NOT allow excess Hartco® Easy Clean floor cleaner to remain on the floor’s surface. Excess liquid may damage the fiber of the wood.

• Use interior and exterior doormats at all entrances to collect dirt and moisture and prevent it from being tracked onto the floor.

• Area rugs are recommended in front of kitchen sinks, at all pivot points and within high-traffic areas. Do not use rugs with solid rubber or vinyl backings. The rugs must be made of a breathable material to prevent moisture entrapment.

• Never clean or wet mop with water. Water may permanently damage the floor.

• Never use any of the following products (or products similar in nature) on your floor: ammonia-based cleaners, acrylic finishes, wax-based products, detergents, bleach, polishes, oil soap, abrasive cleaning soaps, or acidic materials such as vinegar. Many of these products can pit or etch the finish of your flooring or prevent the proper use of recommended maintenance materials.

• Keep animal nails trimmed to minimize finish scratches.

• Do not damage your floor with shoes having heel taps or sharp objects protruding from the sole such as rocks, exposed nails and gravel.

• Avoid walking on wood floors with spike- or stiletto-heeled shoes. Spike or stiletto high-heels must be properly maintained to prevent damage from the steel heel support.

• Do not roll or slide heavy objects directly upon the floor. When moving appliances or heavy furniture, consider laying a solid protective covering on your floor and gently "walk" the item across it. Carpet or cardboard is not adequate to prevent surface compression scratches. 

• Use furniture leg protector pads under all furniture and make certain to keep them clean and well maintained.

• Replace hard, narrow furniture rollers with wide rubber rollers.

• Keep the relative humidity in your home between 35% and 55%.

•  Protect your floor from direct sunlight. Use curtains and UV resistant film on large glass doors and windows.
  

Quick Fix Tips
Spots caused by food,water or animals

• Apply Hartco® Easy Clean floor cleaner to a clean soft cloth.

• Rub the area to remove the stain or spot.

• More stubborn spots may require additional cleaning with Hartco® Wipe Clean, followed by cleaning with Hartco® Easy Clean floor cleaner.
  

Grease/Lipstick/Crayon/Ink Spots/Rubber Heel Marks

• Apply Hartco® Easy Clean floor cleaner to a clean soft cloth.

• Rub the area to remove the stain or spot.

• If stain remains, rub with a cloth dampened with Hartco® Wipe Clean and follow up by cleaning area with Hartco® Easy Clean floor cleaner.

Chewing Gum, Candle Wax

• Apply a sealed plastic bag filled with ice on top of the deposit.

• Wait until deposit becomes brittle enough to crumble off.

• After deposit has been removed, clean entire area with Hartco® Easy Clean floor cleaner.

Minor Abrasions/Scratches

• Use Hartco’s Touch-Up Kit to make minor repairs

Chips, broken edges and gaps

• Blend area with appropriate Hartco® touch up pen or fill stick from Hartco® Touch-Up Kit or the appropriate Hartco® Filler.

Deep Scratches/Gouges

• Individual planks, strips or parquets that are heavily gouged or damaged can be replaced.

Care and Maintenance Guidelines for Hartco® HartWood® Plank, HartWood® Parquet and Pattern Plus®5000. (Non-urethane finish)

Follow these instructions in addition to the previous maintenance and floor care tips:
Renewing worn areas:
Residential: In worn areas refurbish the flooring with an application of Hartco® Spray Tone. Mist the Hartco® Spray Tone on the floor and rub briskly until it has
been completely absorbed into the wood. Allow no excess to remain on the surface. Allow the Hartco® Spray Tone to dry overnight.
Commercial: Using a commercial buffer mist the Hartco® Spray Tone on the floor and buff until dry. For machines of less than 175 RPM, use red pads; machines
of higher speed (up to 1,000 RPM) should use white- or buff-colored pads.
Renewing gloss levels:
Residential: Apply several thin coats of Hartco® Pattern Plus® Shine as necessary to maintain the appearance of the floor.
Commercial: Use a commercial buffer. If the machine is 175 RPM or less, use red or white pads if higher speed. Mist Hartco® Spray Shield in front of the machine and buff until dry. Apply as many coats as necessary to achieve the appearance needed. With minimal usage the floor can be maintained at a satin gloss level. More frequent applications can adjust the gloss to a very high level.